Pppoe Wan Mode - D-Link GamerLounge DGL-4300 Owner's Manual

PPPoE WAN Mode

A method of connection that requires you to enter a Username and Password (provided by your
Internet Service Provider) to gain access to the Internet.
Username: The username that you use to login to your Internet connection.
Password:
Enter the password associated with your username.
Verify Password: Retype the password for verification.
Service Name:
If your ISP requires a service name, enter it here.
Reconnect Mode: Typically PPPoE connections are not always on. The D-Link Router allows
you to set the connection mode:
• Always on: A connection to the Internet is always maintained.
• On demand: A connection to the Internet is made as needed.
• Manual: You have to open up the Web-based management interface
and click the Connect button manually any time that you wish to connect
to the Internet.
Maximum Idle Time: Defines how long the machine can be idle before the PPPoE connection
is disconnected.
PPPoE Connection:
The Disconnect button will immediately terminate any active connection.
Note: These buttons become enabled after the router has been rebooted
with the PPPoE mode selected.
21
Using the Configuration Interface
Basic > WAN > PPPoE
D-Link Systems, Inc.