D-Link AirSpot DSA-3200 User Manual page 9

D-link systems wireless g public/private gateway user manual dsa-3200
Hide thumbs Also See for AirSpot DSA-3200:
Table of Contents

Advertisement

DSA-3200 Wireless Service Gateway User Manual
Device Physical Connections
COM Port -
System debugging
menu via Terminal
Emulation Software
(9600,8,n,1,n)
Public LAN Ports –
Connect to Hub or Switch (non-L3)
and/or 802.11 APs to offer wired or
wireless Network service that will
require a user to authenticate prior
to gaining Network access.
Serial COM Port: This port serves two distinct purposes:
1.
Connect to a DSA-3100P to auto-generate temporary User accounts and print detailed receipts to
be given to customers. Receipts include pricing and Wi-Fi Network information (SSID, WEP, etc.)
2.
Use the included Null modem cable to connect to a PC with a serial COM port in order
troubleshoot, debug, change admin password, or to restore the factory default settings without
using the Web-based UI. Configure Terminal Emulation software (Hyperterminal) as follows: 9600,
8, N, 1, No flow control.
WAN Port: Connects to a network not managed by the DSA-3200 via an Ethernet port
on most Cable or xDSL modems, or a Switch or Hub in an existing Ethernet Network.
Public LAN Ports (1 and 2): The Public LAN ports connect to the managed network
that will require user authentication prior to granting Network Access. This Network
may consist of Hubs and/or Switches (non-L3) as well as 802.11 Access Points.
Private LAN Ports (1 and 2): The Private LAN port is used to connect to the trusted
Ethernet network that will not require authentication prior to access.
Reset Button: Push and release to restart, push and hold for 15s to reset defaults.
DC Power Socket: Connect the power supply to a wall outlet before connecting here.
Private LAN Ports –
Connect to the trusted
LAN, or that network which
will not require a user to
authenticate prior to gaining
Network access.
WAN Port -
Connect directly to
an Ethernet Cable
or DSL modem or
to an existing LAN
infrastructure.
8
Reset button –
Restore the factory
default configuration.
Press once to reboot,
press and hold for 15
seconds to reset.
Receptor for
5V DC Power
Adapter

Advertisement

Table of Contents
loading

Table of Contents