D-Link AirSpot DSA-3200 User Manual page 41

DSA-3200 Wireless Service Gateway User Manual
Trans Full Name: Select whether or not the DSA-3200 will transfer the entire
username or a partial username to the RADIUS server for authentication.
Enable: ID and postfix will transfer to RADIUS server for authentication.
Disable: Only ID will transfer to RADIUS server for authentication.
Server IP: Enter the appropriate IP Address or Fully Qualified Domain Name of the
RADIUS server to be used to authenticate user accounts.
Authentication Port: The TCP Port that will be used to authenticate users through the
RADIUS server.
Accounting Port: The TCP Port that will be used to communicate accounting
information to the RADIUS server.
Secret Key: This shared secret should be configured on both the RADIUS server and
RADIUS client (DSA-3200). The shared secret assures only the RADIUS server and
client can decipher each message.
Accounting Service: Enabling this feature tells the DSA-3200 to report account
usage statistics to the RADIUS server for each authenticated user that is connected to
the DSA-3200.
Authentication Method: Choose between CHAP or PAP as the authentication
protocol between the RADIUS Server and Client. In general CHAP is more secure.
Layer 2 Authentications:
Disable: All authentications will be performed at Layer 3, after the client has
already joined the network.
40