Table of Contents
Advertisement
DSA-3200 Wireless Service Gateway User Manual
SSID:
The SSID is the unique name shared among all devices in a wireless network.
The SSID must be the same for all devices in the wireless network. It is case sensitive
and must not exceed 32 characters (any keyboard character is allowed).
Sync to Ticket: Checking this box will enter the SSID of the internal AP in the
On-Demand User receipt SSID field.
Auto Channel Selection: The system will automatically select the appropriate
channel based on relative noise and interference on available channels when enabled.
Channel: Select the appropriate channel from the list to correspond with your network
settings, between 1 and 11 (North America). Channels 1, 6, and 11 tend to have the
least amount of overlap in the spectrum.
Transmission Mode: There are 3 Wireless modes available: 802.11b (2.4GHz,
11Mbps), 802.11g (2.4GHz, 54Mbps) and Mix mode (b and g)
SSID Broadcast: If enabled, the SSID will be broadcast in most every 802.11 frame.
Disabling this feature removes the SSID from most but not all 802.11 frames to add
privacy to your wireless network. When disabled clients trying to join the Network must
supply the SSID, as it most likely will not show up in normal Site Survey scans.
Layer 2 Client Isolation: Enabling this feature prevents wireless clients connected to
the Internal AP from communicating with one another. This is to ensure the privacy
and safety of all guests who use the wireless public access network.
Security:
The Security screen is where Wired Equivalent Privacy can be enabled and
configured if so desired. Click the Security Hyperlink.
23
Advertisement
Table of Contents
