Location; Installation - Beko WMA510 Manual

You can locate the washing machine
anywhere (except bathrooms, showers and
away from rain, damp places and water) as
long as you have hot and cold water supply,
drainage and electrical connection alongside.
Ensure there is clearance each side of the
machine to allow slight side ways movement
during washing and spin drying.
C
Removing transport safety bolts
The transport safety bolts must be removed
before any operation of the machine.
Turn the bolt heads C anti-clockwise until
1
the bolt can be partially withdrawn.
2 Remove them and the rubber bushes by
pulling outwards. An up/down action and
a small squirt of washing up liquid will ease
removal.
Plastic plugs, supplied inside the protective
3
bag, designated P, should be placed in the
safety bolt holes as shown.
Attention!
Keep the safety bolts for future
transportation and reinstate them before
transporting your machine. Never transport
your machine without the transport bolts in
position. Any resultant damage is not covered
by the warranty.
Attention!
Never place your machine on a carpet. This
prevents air circulation. The electrical
components of the machine may overheat and
may cause damage.
Please ensure the power, water supplies
and waste are suitable, if in doubt, consult a
qualified plumber or electrician.
C
Feet adjustment
To ensure quiet and stable operation, the
machine should be positioned correctly and
on the level. If the machine is unstable, adjust
one of the front feet by loosening the plastic
lock nut and screwing or unscrewing the foot
until the machine is level. After positioning,
tighten the lock nut.
5

location

installation

P
5