Beko WM6167 Installation & Operating Instructions And Washing Guidance page 32

Table of Contents

Advertisement

- Washing performance is poor: Oily stains appear on laundry.
- Washing performance is poor: Bad odor
- Oily accumulations on the drum may
have stuck to the laundry.
- Oily accumulations on the drum may
have stuck to the laundry.
Color of the clothes faded.
- Excessive laundry loaded into
machine.
- Detergent may have gotten damp.
- A higher temperature might have
been selected.
It does not rinse well.
- The amount, brand and storage
conditions of the detergent used might
not be appropriate.
- Detergent might have been put in the
wrong compartment.
- Machine filter may be clogged.
- Drain hose may be folded.
- Intermediate spins may be skipped.
Clothes stiffened.
- Insufficient amount of detergent used.
- The detergent may have been
placed into the wrong compartment;
the detergent may be mixed with the
softener.
- Such odors and bacteria layers are formed on
the drum as a result of continuous washing at
lower temperatures and/or in short programs.
- Leave the detergent dispenser drawer as well
as the loading door of the machine ajar after each
washing. Thus, a humid environment favorable for
bacteria cannot be created inside the machine.
- Machine must be operated empty either at 60°C
or 90°C program with detergent every 6 months.
- Do not load the machine in excess
- Store detergent in a closed and dry location.
- Do not keep them under high temperatures.
- Select the proper program and temperature
according to the type and soiling degree of the
laundry.
- Store detergent in a closed and dry location. Do
not keep them under high temperatures.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
- Check the filter.
- Check the drain hose.
- There may be an imbalance of laundry in the
machine.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
- Do not mix the softener with detergent when
putting in the compartment.
- Wash and clean the drawer with hot water.
32
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm 6167 wWm 6167 s

Table of Contents