Related Manuals for Beko WM 62125W
Summary of Contents for Beko WM 62125W
- Page 1 Washing Machine User Manual WM 62125W Document Number= 2820524686 / 30-11-15.(16:26)
- Page 2 This product was manufactured using the latest technology in environmentally friendly conditions.
-
Page 3: Important Instructions For Safety And Environment
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children must not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children of less than 3 years... -
Page 4: Intended Use
• If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks. • Place the product on a rigid, flat and level surface. • Do not place it on a long-pile rug or similar surfaces. • Do not place the product on a high platform or near the edge on a cascaded sur- face. • Do not place the product on the power cable. • Never use sponge or scrub materials. These will damage the painted, chrome plated and plastic surfaces. 1.2 Intended use • This product has been designed for domestic use. It is not suitable for commer- cial use and it must not be used out of its intended use. • The product must only be used for washing and rinsing of laundry that are mar- ked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or trans- portation. 1.3 Children's safety • Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children. • Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product. • Do not forget to close the loading door when leaving the room where the product is located. -
Page 5: Disposing Of The Waste Product
1.5 Disposing of the waste product • This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the pro- duct with normal domestic waste at the end of its service life. Take it to a collec- tion point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the envi- ronment and natural resources by recycling used products. For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before disposing of the product. -
Page 6: Appropriate Installation Location
2 Installation Loosen all the bolts with a suitable spanner until they rotate freely (C). Remove transportation safety bolts by turning them To make the product ready for use, review the information in gently. Attach the plastic covers supplied in the User Manual the user manual and make sure that the electricity, tap water bag into the holes on the rear panel. (P) supply and water drainage systems are appropriate. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out. INFORMATIONS Preparation of the location and electrical, tap water and waste INFORMATIONS water installations at the place of installation is under customer’s responsibility. - Page 7 2.5 Connecting to the drain 2.7 Electrical connection • The end of the drain hose must be directly connected to Connect the product to a grounded outlet protected by a 13 the wastewater drain or to the washbasin. A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in WARNING accordance with the local regulations. • Connection must comply with national regulations. Do not remove the transportation locks before taking out the • Power cable plug must be within easy reach after packaging reinforcement. installation. • If the current value of the fuse or breaker in the house is • The hose should be attached to a height of at least 40 cm, less than 13 Amps, have a qualified electrician install a 13 and 100 cm at most.
-
Page 8: Transportation Of The Product
2.10 Transportation of the product Unplug the product before transporting it. Remove water drain and water supply connections. Drain the remaining water in the product completely; see, "Draining remaining water and cleaning the pump filter". Install transportation safety bolts in the reverse order of removal procedure; see, "Removing the transportation locks". INFORMATIONS Never move the product without the transportation safety bolts properly fixed in place! 2.11 Disposing of the old product Dispose of the old product in an environmentally friendly manner. Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product. For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be Transportation of the product... - Page 9 3 Preparation WARNING Follow the information in the “Programme and consumption table”. 3.1 Things to be done for energy saving When overloaded, machine’s washing performance will drop. Following information will help you use the product in an Moreover, noise and vibration problems may occur. ecological and energy-efficient manner. Laundry types and their average weights in the following table • Operate the product in the highest capacity allowed by the are given as examples. programme you have selected, but do not overload; see, "Programme and consumption table". Laundry type Weight (g) • Always follow the instructions on the detergent packaging.
-
Page 10: Using Softeners
Detergent, softener and other cleaning agents • Use just a little amount (approx. 50 ml) of bleaching agent • Add detergent and softener before starting the washing and rinse the clothes very well as it causes skin irritation. programme. Do not pour the bleaching agent onto the clothes and do not use it for coloured clothes. • Never open the detergent drawer while the washing • When using oxygen based bleaches, follow the instructions programme is running! • When using a programme without prewash, do not put any on the package and select a programme that washes at a detergent into the prewash compartment (compartment nr. -
Page 11: Tips For Efficient Washing
3.10 Tips for efficient washing Clothes Delicates/Woolens/ Light colours and whites Colours Dark colours Silks (Recommended (Recommended (Recommended (Recommended temperature range based temperature range temperature range temperature range based on soiling level: cold- based on soiling based on soiling on soiling level: 40-90ºC) 40ºC) level: cold-40ºC) level: cold-30ºC) It may be necessary to Powder and pre-treat the stains or liquid detergents perform prewash. Powder recommended for and liquid detergents colours can be used at Liquid detergents Prefer liquid... -
Page 12: Operating The Product
4 Operating the product 4.1 Control panel 1 - Programme Selection knob (Uppermost position On / Off) 2 - Door open indicator 3 - Programme Follow-up indicator 4 - Start / Pause button 5 - Spin Speed Adjustment button 4.2 Preparing the machine Use this programme to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a gentle Make sure that the hoses are connected tightly. Plug in your machine. Turn the tap on completely. Place the laundry in the action and has a shorter washing cycle compared to the machine. Add detergent and fabric softener. Cotton programme. For curtains and tulle, use the Synthetic 40˚C programme. Programme selection As their meshed texture causes excessive foaming, wash the Select the programme suitable for the type, quantity veils/tulle by putting little amount of detergent into the main and soiling degree of the laundry in accordance with the... -
Page 13: Special Programmes
4.5 Special programmes For specific applications, select any of the following programmes. • Rinse Use this programme when you want to rinse or starch separately. • Spin + Drain Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine. INFORMATIONS If you wish to drain the water only without spinning your laundry, select the Spin+Pump programme and press “Start / Pause” button. Machine will switch to spin step once it completes the program step. Press “Start / Pause” button to stop the machine as soon as you see the drum rotating. And cancel this programme by turning Programme Selection knob to any other position. 4.6 Spin speed selection Whenever a new programme is selected, the recommended spin speed of the selected program is displayed on the spin speed indicator. -
Page 14: Programme And Consumption Table
4.7 Programme and consumption table Programme Cottons 1.63 1200 Prewash-Cottons 1.10 1200 Cottons 0.97 1200 Cottons Cold 0.10 1200 Cottons Eco 60** 0.96 1200 Cottons Eco 60** 0.96 1200 Cottons Eco 40** 0.63 1200 Synthetics 1.02 Synthetics 0.50 Synthetics Cold 0.10 Delicates 30° 0.26 Woollens 0.35 Hand Wash 20°... - Page 15 4.8 Starting the programme If you must certainly open the loading door when the “Door Press Start / Pause button to start the programme. Open” light is off, you need to use “Spin+Pump” programme. See “Spin+Pump” Programme follow-up light showing the startup of the programme will turn on. Re-spinning the laundry Progress of programme Unbalanced load control system can prevent spinning because of unbalanced load of laundry in the machine. If you Progress of a running programme can be followed from the would like to spin again: Programme Follow-up indicator with the lights "Running" and Rearrange the laundry in the machine. Select Spin+Pump "End/Cancel". programme and press “Start / Pause" button. INFORMATIONS 4.11 End of programme If the machine does not pass to the spinning step, automatic "End/Cancel" light on the programme follow-up indicator will unbalanced load detection system might have been activated due to light up once the programme comes to an end; and "Door the unbalanced distribution of the laundry in the machine.
-
Page 16: Maintenance And Cleaning
5 Maintenance and cleaning After every washing make sure that no foreign substance is left in the drum. Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals. 5.1 Cleaning the detergent drawer Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time. If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick. INFORMATIONS Press the dotted point on the siphon in the softener Foreign metal substances will cause rust stains in the drum. compartment and pull towards you until the compartment is Clean the stains on the drum surface by using cleaning agents for removed from the machine. -
Page 17: Cleaning The Water Intake Filters
5.4 Cleaning the water intake filters Open the filter cover by pulling it from both sides at the top. There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine. Filters should be cleaned as they do get dirty. -
Page 18: Technical Specifications
6 Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WM62125W Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.960 Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0.960 Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0.630 Power consumption in ‘off-mode’ (W) 0.200 Power consumption in ‘left-on mode’ (W) 1.000 Annual Water Consumption (l) 9900 Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) Maximum spin speed (rpm) 1200 Remaining moisture Content (%) Standard cotton programme Cotton Eco 60°C and 40°C... -
Page 19: Troubleshooting
7 Troubleshooting Program does not start after closing the door. • Start / Pause / Cancel button was not pressed.>>> *Press the Start / Pause / Cancel button. Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. (See "Cancelling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine. Machine vibrates or makes noise. • Machine might be standing unbalanced. >>> Adjust the feet to level the machine. • A hard substance might have entered into the pump filter. >>>... - Page 20 20 / EN Washing Machine / User’s Manual...
- Page 21 21 / EN Washing Machine / User’s Manual...
- Page 22 22 / EN Washing Machine / User’s Manual...
- Page 23 If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document. Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line. Tel: 0845 600 4911...
-
Page 24: Washing Machine
Guarantee Washing Machine Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect. • The cost of functional replacement parts, but excluding consumable items. • The labour costs of a Beko approved repairer to carry out the repair. What is not covered? • Transit, delivery or accidental damage or misuse and abuse.