Setup Speaker Parameters Automatically; Set Up The Speaker Parameters Automatically (Ypao) - Yamaha HTR-5063 Quick Reference Manual

5 5

Set up the speaker parameters automatically (YPAO)

When connection is fi nished, adjust the status, sizes, and volume balance of the
speakers to provide an optimal sound fi eld. This unit is equipped with a YPAO
(Yamaha Parametric Room Acoustic Optimizer) function that adjusts the speaker
balance automatically with a simple procedure.
When you use YPAO, a test tone will be output from the speakers for approximately 3 minutes and acoustic measuring will be performed.
When using YPAO, be careful of the following.
• The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby.
• Please take care that the test tone does not frighten any small children.
When operating the YPAO, information is displayed both on the TV screen (On-Screen Display) and on the front panel. This explanation will use
operations while viewing the display on the TV screen.
1
Check the following before using YPAO.
This unit
• The headphones are removed.
TV
• This unit is connected to the TV correctly.
• The power is turned on.
• The video input to which the video output from this unit has been selected.
Subwoofer
• The power is turned on.
• Volume is set to approximately half, and the cross-over frequency (if present)
is set to maximum.
2
Place the supplied YPAO microphone at ear height in your listening position.
When positioning the microphone, we recommend that you use
equipment that allows you to adjust the height (such as a tripod) as a
microphone stand. When using a tripod, use the tripod screws to fi x
the microphone in place.
3 Press RECEIVER A on the remote control to switch this unit on.
4
Connect the YPAO microphone to the YPAO MIC jack on the front panel.
YPAO MIC
"MIC ON. View OSD MENU" appears
on the front panel display, and then
appears the following display on the TV
screen.
INFO
YPAO microphone
- 6 -
CROSSOVER/
HIGH CUT
VOLUME
MIN MAX MIN MAX
Subwoofer examples
YPAO microphone
Auto Setup
EQ Type;;;;Natural
. Start
[OPTION]:EQ Select
[SETUP]:Start
Continues to
the next page