Windows 2000 (Rfc 1483/Rfc 1577) - D-Link DSL-100D User Manual

Windows 2000 (RFC 1483/RFC 1577)

1. Double-click on the My Computer icon, then the Control Panel icon, and then the Network
and Dial-up Connections icon.
2. The Network and Dial-up Connections window will appear. Right click on the Local Area
Connection for the D-Link DSL-100D ADSL PCI Modem.
3. The Local Area Connection window will appear. Click on Internet Protocol (TCP/IP), then
click on Properties.
4. The Internet Protocol (TCP/IP) window will appear. Under the General tab, select Use the
following IP address. Enter the IP address, Subnet Mask, and Default Gateway given to
you by your ISP or ADSL service provider. Click OK.
5. The General tab will again appear. Click OK.
6. The Network and Dial-up Connection window will appear. Close this window to complete
the connection.
31