D-Link DSL-100D User Manual page 33

2. You now need only to provide a User Name and Password, no other information is required.
The sample window pictured below appears on a PC running Windows 95 or 98/98SE after
you click on the icon.
3. Enter the User Name and Password here and click on Connect. You do not need to enter a
phone number or in the case of Windows NT 4.0, you do not need to enter the domain
information. Windows 2000 users will click on Dial to connect. Windows NT 4.0 users click on
OK to connect.
4. A few seconds may be required for the negotiation phase of the connection procedure. Once
the connection is established, a new window will confirm the connection.
5. Click on Close and you are done.
29