D-Link DSL-100D User Manual page 28

2. In the Configuration menu, you will need to choose the ADSL connection mode as instructed by
your ADSL service provider. Select ANSI T1.413 Issue 2, ITU G992.2 Annex A (G.lite), or
ITU G992.2 Annex A in the Select ADSL Mode field by checking the box to the left of the mode.
If you are unsure which mode to select you can select all three, the correct one will be detected
automatically. Click Set when finished.
3. In the same window, you must define the data framing method used in the Framing pull-down
menu. If your ADSL service provider doesn't instruct you which framing method to use, choose
VC MUX for RFC 2364 (PPPoA), LLC/SNAP for RFC 1483 (MPoA) and RFC 1577 (IPoA). You
must also enter the VPI and VCI values assigned to you. Click Setting when finished.
1. You must restart for the settings to take effect. Click Yes.
24