Sleep Timer Setting - Aiwa CX-NV20 Operating Instructions Manual

1
SHIFT SLEEP
@@
Q 1X* Q
d!)
2 M
DOWN
Q9
(
SLEEP TIMER SETTING
When the sleep timer is used, the power is automatically turned off
after the specified time has elapsed.
You can also carty out the following steps while the power is off.
1
2
While pressing the SHIFT button, press the SLEEP
button on the remote control.
"SLEEP @ and "60@ are displayed. "SLEEP@ goes out in
4 seconds, and the sleep timer starts to work. If you wish to
change this time, go to step 2 before "SLEEP" @ goes out.
Press the 4 DOWN or _ UP button to specify
the time until the power is turned off.
Each time it is pressed, the time changes between 240 and 10
minutes in 1O-minute steps.
Specified time 0 is displayed.
To change the time
Carry out steps 1 and 2.
To check the remaining time until the power is turned off
While pressing the SHIFT button, press the SLEEP button once.
The remaining time is displayed for 4 seconds.
To cancel the sleep timer mode
While pressing the SHIFT button, press the SLEEP button twice so
that "SLEEP in the display goes out.
48