Streaming Settings - D-Link SecuriCam DCS-5300 User Manual

Using the DCS-5300 with an Internet browser
(continued)
Configuration > Advanced >Network Settings (continued)

Streaming Settings

Control channel port -
Audio channel port -
Video channel port -
Improve audio quality
in low bandwidth
environment -
WLAN Configuration Settings
SSID -
Wireless Mode-
It can be set to other than the default port 5001 to
correspond with the port opened by the firewall.
It can be set to other than the default port 5002 to
correspond with the port opened by the firewall.
It can be set to other than the default port 5003 to
correspond with the port opened by the firewall.
In a low bandwidth network environment you can
check this option to improve
sacrificing some real-time synchronization.
(Service Set Identifier) is a name that identifies a
wireless network. Access Points and wireless
clients attempting to connect to a specific WLAN
(Wireless Local Area Network) must use the
same SSID. The default setting is default.
Click on the pull-down menu; select from the
following options:
Infrastructure - connecting the WLAN using an
Access Point such as the DWL-1000AP+. (The
default setting.)
Ad-Hoc – wireless mode used when connecting
directly to a computer equipped with a wireless
adapter in a peer-to-peer environment.
34
audio quality by