Settings; Network Settings - D-Link DCS-4701E User Manual

Section 3: Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. Please note that PPPoE
must be disabled to make any changes on this page; refer to "PPPoE" on page 27 for more details. After making any changes, click the Save
button to save your changes.
Select this connection if you have a DHCP server running on your network
DHCP:
and would like your camera to obtain an IP address automatically.
If you choose DHCP, you do not need to fill out the IP address settings.
You may obtain a static or fixed IP address and other network information
Static IP Client:
from your network administrator for your camera. A static IP address may
simplify access to your camera in the future.
Enter the fixed IP address in this field.
IP address:
This number is used to determine if the destination is in the same subnet.
Subnet mask:
The default value is 255.255.255.0.
Enter the router/gateway used to forward frames to destinations in a
Default router:
different subnet. Invalid router/gateway settings may cause the failure of
transmissions to a different subnet.
Enter the primary domain name server for translating domain names to IP
Primary DNS:
addresses.
Enter the secondary domain name server for translating domain names to
Secondary
IP addresses.
DNS:
D-Link DCS-4701E User Manual

Settings

Network Settings

LAN Settings
26