Using Ip Surveillance Software; Monitor Program - D-Link SecuriCam DCS-5300 User Manual

Using IP surveillance Software

Upon completion of the installation of the IP surveillance software, you can run
the Monitor program (for monitoring and recording from the DCS-5300) from
the Windows folder:
Start\ Program Files\D-Link\IP surveillance \Monitor
or the directory you specified during the installation.
There is also a Playback program (for accessing and playing video captured in
the Monitor program.) The Playback program is detailed starting on page 68.
Before using the IP surveillance Software programs you will be asked to set the
admin (administrator) password. The admin password should be at least 6
characters in length.
Click
Click
A successful message box will show if you set the admin password successfully.

Monitor Program

Click OK
An Authentication dialog box will appear. Enter "admin" as the login for the first
time and enter a password. You will see the Monitor program on your display.
OK
OK
admin
******
58