Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link DCS-5211L
Summary of Contents for D-Link DCS-5211L
-
Page 2: Manual Overview
Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. -
Page 3: Table Of Contents
System Requirements ..............2 Configuration ..............21 Introduction ................... 3 Using the Configuration Menu ..........21 Features .................... 4 Live Video ..................22 Hardware Overview DCS-5211L ..........5 Setup ....................24 Front ..................5 Setup Wizard ................24 Back.................... 6 Internet Connection Setup Wizard .......25 Hardware Overview DCS-5222L .......... - Page 4 What is WPA? ................52 Configuring with a Router ..........53 Troubleshooting ..............59 Wireless Basics ..............63 Wireless Modes ................67 Networking Basics ..............68 Technical Specifications - Remote Control Unit ....70 Technical Specifications - I/O Terminal Application ..72 Technical Specifications ..........73 D-Link DCS-5211L/DCS-5222L User Manual...
-
Page 5: Product Overview
Section 1 - Product Overview Package Contents DCS-5211L or DCS-5222L Network Camera; and a Remote Control Unit Power Adapter CAT5 Ethernet Cable Quick Installation Guide CD-ROM Camera Base and Mounting kit If any of the above items are missing from your package, please contact your retailer. -
Page 6: System Requirements
• Subscription with an Internet Service Provide (ISP) with 256 Kbps minimum for remote video viewing myDlink Website • Computer with: Microsoft Internet Explorer Requirements 6 or higher with ActiveX Support D-Link DCS-5211L/DCS-5222L User Manual... -
Page 7: Introduction
PC/Notebook over your local network or across the Internet via a web browser. The DCS-5211L included support for Power over Ethernet (PoE), so the camera can be placed in areas where on power outlet is nearby. The DCS-5222L features 802.11n wireless, allowing the camera to be placed anywhere within range of your wireless network. -
Page 8: Features
Section 1 - Product Overview Features • Simple to Use: The DCS-5211L/5222L is a stand-alone system with a built-in CPU, requiring no special hardware or software such as PC frame grabber cards. The DCS-5211L/5222L supports both ActiveX mode for Internet Explorer... -
Page 9: Hardware Overview Dcs-5211L
Section 1 - Product Overview Hardware Overview DCS-5211L Front Light Sensor Passive Infrared Sensor (PIR) for motion detection PIR Motion Sensor Camera Lens Microphone Remote Control Receiver D-Link DCS-5211L/DCS-5222L User Manual... -
Page 10: Back
Micro SD Insert Micro SD card here. Reset Button Press and hold to reset to factory standard. Ethernet port Power jack Connects to a PC or network Connects to the power adapter. through an Ethernet connection. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 11: Hardware Overview Dcs-5222L
Section 1 - Product Overview Hardware Overview DCS-5222L Front Passive Infrared Sensor Light Sensor (PIR) for motion detection PIR Motion Sensor Camera Lens Microphone Remote Control Receiver Wireless Antenna D-Link DCS-5211L/DCS-5222L User Manual... -
Page 12: Back
Micro SD Insert Micro SD card here. Reset Button Press and hold to reset to factory standard. Ethernet port Power jack Connects to a PC or network Connects to the power adapter. through an Ethernet connection. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 13: Installation
B) Using the provided screws; screw the mount to the wall or ceiling, with the correct tools, where the device is to be placed. C) Holding the IP camera firmly, place the IP camera in the mount and swivel until secured. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 14: Inserting A Micro Sd Card
Section 2 - Installation Inserting a Micro SD Card Insert your Micro SD card into the Micro SD card slot on the DCS-5211L/DCS-5222L. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 15: Attaching A Cable To The I/O Terminal
An example of what can be done with a digital input and digital output is the connecting of a motion sensor to the port, signalling the camera to take a snapshot and trigger an alarm connected to the port.* D-Link DCS-5211L/DCS-5222L User Manual... -
Page 16: Connect The Ethernet Cable
Connect the Ethernet Cable Connect one end of the blue Ethernet cables included in your package to the Ethernet port on the back of the DCS-5211L/ DCS-5222L camera. Connect the other end of the cable to an available LAN port on your router or broadband modem. -
Page 17: Setting Up A Wireless Connection With Wps
Now press the WPS button on your router or access point within 1 minute to activate WPS and allow your devices to automatically configure a wireless connections. Note: On some network routers/access points, WPS may need to be activated via the device setup or web-interface. Consult your product’s user manual for further assistance. WPS Button D-Link DCS-5211L/DCS-5222L User Manual... -
Page 18: Wireless Installation Considerations
Wireless Installation Considerations The D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. -
Page 19: Camera Installation Wizard
Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program. The autorun program will open the Camera Installation Wizard. Simply click Start to go through the Installation Wizard, which will guide you through the installation process from connecting your hardware to configuring your camera. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 20: Wps - Push Button Setup
WPS feature. If you are not sure where the WPS button is on your router, please refer to your router’s User Manual. The 5222L will automatically create a wireless connection to your router. While connecting, the green LED will flash and your camera will reboot. WPS Button D-Link DCS-5211L/DCS-5222L User Manual... -
Page 21: Mydlink Portal
Section 3 - mydlink Portal mydlink Portal After registering your DCS-5211L/5222L camera with a mydlink account in the Camera Setup Wizard. You will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account,... -
Page 22: Camera Status
• Check to make sure that the power LED on your camera is lit solid red. If you still cannot access your camera, reset your camera and run the Camera Setup Wizard again from the CD- ROM included in your package. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 23: Live Video
If the camera is available, a Live Video feed will be displayed. Video will be shown at full resolution if viewing your camera from a PC on the same local network, or viewing your camera from a PC on a remote network. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 24: Camera Info/Playback
You can set up advanced configuration by clicking Advanced Setting: Setting Button. Delete You can remove your camera by clicking Delete Camera button. Camera: Search for Seraching recording time after download or playback. clips to view: D-Link DCS-5211L/DCS-5222L User Manual... -
Page 25: Configuration
After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your DCS-5211L/5222L. At the end of the wizard, click Go To Camera, or enter the IP address of your camera into a web browser, such as Mozilla Firefox. -
Page 26: Live Video
Click this button to quickly move the camera to the desired patrol setup according to preset positions. Please refer to “camera control” setup to create preset positions. The next page contains several icons which can be used to control the camera’s main functions. D-Link DCS-5211L/DCS-5222L User Manual... - Page 27 PC’s speakers. Click again to turn off. Sends audio from a microphone Talk button connected to your PC through to the speakers connected to the camera. Zoom buttons Zooms in or out. D-Link DCS-5211L/DCS-5222L User Manual...
-
Page 28: Setup
You may choose to configure your network by using the Internet Connection Setup Wizard that includes step-by-step instructions to connect your camera to the Internet. Alternatively, you can manually configure your connection by clicking Manual Internet Connection Setup. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 29: Internet Connection Setup Wizard
Section 4 - Configuration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the Internet. Note that this wizard will not register your camera with mydlink.com. - Page 30 Password: Enter your password used to connect to the DDNS server. Timeout: You can setup how often the camera notifies the DDNS server of its current global IP address by entering a whole number in hours. D-Link DCS-5211L/DCS-5222L User Manual...
- Page 31 Enable Daylight Saving box and select Auto Daylight Saving to have DST set automatically or select Set date and time manually to enable drop-down menus so that you can set the start and end time of daylight saving yourself. Click Next to continue. D-Link DCS-5211L/DCS-5222L User Manual...
- Page 32 Section 4 - Configuration A summary of the options you selected is displayed for confirmation. If you are happy with the selected configuration, click Apply otherwise click Back to make the required changes. D-Link DCS-5211L/DCS-5222L User Manual...
-
Page 33: Network
If your router supports UPnP, your camera and router can communicate allowing the router to discover which ports are used by each camera automatically without the need to open ports or port forward. Bonjour: Enabling Bonjour will allow discovery of cameras by Mac computers. D-Link DCS-5211L/DCS-5222L User Manual... - Page 34 (port forward). For additional help on configuring your camera to work with your router, please refer to Appendix A: Installing the DCS-5211L/DCS-5222L on a Router Without UPnP. For installing multiple cameras, ONE port per camera must be opened on your router, the Web server (HTTP) port.
-
Page 35: Wireless
Check this box to display the key. Antenna: Select to use the internal or external wireless antenna. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 36: Dynamic Dns
Enter your password again for verification. Timeout: You can setup how often the camera notifies the DDNS server of its current global IP address by entering a whole number in hours. Status: Displays the connection status of your DDNS account. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 37: Image Setup
This can be used to allow manual control of the shutter speed. Select slower shutter speeds when environment is dimly lit, faster speeds are required when in brighter lighting. Note: Mirror and Flip can be used if you have mounted the DCS-5222L on the ceiling. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 38: Audio And Video
Note: Video Profile 3 is always set to MJPEG as the Encode Type to ensure that at least one of the Video Profiles are viewable by non-IE browsers. Video Profile 4 is for mobile devices only, and always uses MPEG-4 as the Encode Type. D-Link DCS-5211L/DCS-5222L User Manual... - Page 39 5 fps and the bit rate to 20 Kbps. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5211L/DCS-5222L User Manual...
-
Page 40: Time And Date
Copy your Computer’s Click to synchronize the time information Time Settings: from your PC. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 41: Video Clip
You will need to enter your FTP or email server/ account settings. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 42: Snapshot
FTP or emailed to an email address. You will need to enter your FTP or email server/account settings. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 43: Sd Recording
When this option is selected, it will cause the oldest file to be deleted when the system requires storage space for new files. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 44: Digital Output
Section 4 - Configuration Digital Output You can enable the digital output port as well as configure a trigger event. Motion Detection: When a motion detection is triggered. D/I Signal: A trigger from the Digital Input port. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 45: Motion Detection
LIVE VIDEO page will display a blinking orange motion video icon like the one below. No Motion Motion The motion notification will continue to blink as long as motion is detected. If no additional motion is detected, it will return to its original state after eight seconds. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 46: Camera Control
Select. You can then select the order in which the camera will patrol through the preset locations by selecting a location and clicking Up or Down. Click Remove to remove a location from the list. Click Save when finished. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 47: Sd Management
The file’s size. Refresh: Click to refresh the page. Files per page: Select the number of files to be displayed on a single page. The maximum is 100 files. Pages: Show the current and total pages. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 48: Maintenance
RTSP Authentication: Check to enable RTSP streaming. HTTP Authentication: Check to enable HTTP streaming. Snapshot URL Select Enable to allow access to the current camera snapshot Authentication: via the web address indicated. D-Link DCS-5211L/DCS-5222L User Manual... - Page 49 Select on/off or schedule the privacy mode for your camera to ensure the privacy. When the privacy mode is turned on, the camera hides the lens by rolling it back into the unit. After making any changes, click the Save button to save your changes. D-Link DCS-5211L/DCS-5222L User Manual...
-
Page 50: System
Click this button to reset all settings to their factory Defaults: defaults. If you select to reset your settings, you will need to set up your camera again. Reboot Device: Clicking the Reboot button will reboot your device. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 51: Firmware Upgrade
Note: It is recommended that you use a wired connection for your computer and camera when upgrading the firmware. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 52: Status
Section 4 - Configuration Status Device Info This screen displays various information about your camera and its current settings. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 53: Log
Section 4 - Configuration The log shows you a list of events that have happened recently. You can download the log by clicking the Download button, or you can empty the log by clicking the Clear button. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 54: Help
Section 4 - Configuration Help D-Link DCS-5211L/DCS-5222L User Manual... -
Page 55: Wireless Security
Code for Information Interchange – alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 56: What Is Wpa
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 57: Configuring With A Router
For the basic setup of the DCS-5211L/DCS-5222L, follow the steps outlined in the Quick Installation Guide. After you have completed the setup of the DCS-5211L/DCS-5222L outlined in the Quick Installation Guide you will have an operating camera that has an assigned IP Address. Because you are using a router to share the Internet with one or more PCs, the IP Address assigned to the Network Camera will be a local IP Address. - Page 58 Run the setup wizard from the CD included with the DCS-5211L/DCS-5222L. Follow the steps in the Quick Installation Guide to configure the DCS-5211L/DCS-5222L. The camera will be assigned a local IP Address that allows it to be recognized by the router. Write down this IP Address for future reference.
- Page 59 The Setup > Network page displays the port settings for your camera. If necessary, these ports can be changed if they are already in use by other devices (e.g. in a multiple camera environment). Note: Both the HTTP port and RTSP port are required to be opened for the DCS-5211L/DCS-5222L. D-Link DCS-5211L/DCS-5222L User Manual...
- Page 60 Router Set-Up and Installation The following steps generally apply to any router that you have on your network. The D-Link DIR-655 is used as an example to clarify the configuration process. Configure the initial settings of the DIR-655 by following the steps outlined in the DIR-655 Quick Installation Guide.
- Page 61 The firewall security features built into the DIR-655 router prevent users from accessing the video from the DCS-5211L/DCS-5222L over the Internet. The router connects to the Internet over a series of numbered ports. The ports normally used by the DCS-5211L/DCS-5222L are blocked from access over the Internet.
- Page 62 Enter valid ports in the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual Server List to enable your settings. D-Link DCS-5211L/DCS-5222L User Manual...
-
Page 63: Troubleshooting
Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DCS-5211L/DCS-5222L. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows Vista and XP. If you have a ®... - Page 64 Make sure that the Network Camera isn’t conflicting with any Web server you may have running on your network. The default router setting might be a possible reason. Check that the configuration of the router settings allow the Network Camera to be accessed outside your local LAN. D-Link DCS-5211L/DCS-5222L User Manual...
- Page 65 - This Network Camera can only be installed indoors. Do not install this camera in a place where IR interference can be a problem. IR interference can be found close to glass doors or windows, where direct sunlight can cause interference or in the path of car headlights. D-Link DCS-5211L/DCS-5222L User Manual...
- Page 66 2.5 meters can smaller movements of an object, with the average adult human’s height, be detected. Between a distance of 2.5 and 5 meters, a larger movement of an object is required for detection. - Install this camera on a firm, static, anti-shock surface. D-Link DCS-5211L/DCS-5222L User Manual...
-
Page 67: Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless* connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. - Page 68 D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link de- livers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B.
- Page 69 • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DCS-5211L/DCS-5222L User Manual...
- Page 70 The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
-
Page 71: Wireless Modes
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 72: Networking Basics
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. -
Page 73: Statically Assign An Ip Address
® Windows XP - Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. -
Page 74: Technical Specifications - Remote Control Unit
Privacy key Pressing privacy key will tilt to privacy position where camera is hidden in cover (privacy mode). Pressing again privacy key in privacy mode will tilt back to the previous position. D-Link DCS-5211L/DCS-5222L User Manual... - Page 75 Pan move to the left (2,2) ..................... Home Return to home position (2,3) ....................Right Pan move to the right (3,1) ..................Calibrate Calibrate home position (3,2) ....................Down Tilt move down (3,3) ................... Privacy Tilt to privacy position. D-Link DCS-5211L/DCS-5222L User Manual...
-
Page 76: Technical Specifications - I/O Terminal Application
• Monitor the status of digital input. Load • Drive the output switch on or off. Interface Schematic Output device (load) is driven by an external AC or DC power supply. Input device (active control device) has an independent power supply. D-Link DCS-5211L/DCS-5222L User Manual... -
Page 77: Technical Specifications
• MDI/MDIX auto-negotiation • 802.3x Flow Control support for Full-Duplex mode Maximum Resolution • 1280x720 Wireless Connectivity (DCS-5222L only) Audio Codec • 802.11g/n Wireless with WEP/WPA/WPA2 Security • PCM/ADPCM • WPS Support Light Sensitivity • 1 lux@F1.9 D-Link DCS-5211L/DCS-5222L User Manual... - Page 78 • Powered by an external power adapter • Maximum power consumption DCS-5222L: 10.5W @motor on ; 8.2W @motor off DCS-5211L : 9W @motor on ; 6.1W @motor off Dimensions (WxDxH) • 114.0mm x 114.0mm x 125.0mm (without bracket and stand) Weight •...