Dubbing The Whole Tape - Aiwa CX-NMT50 Operating Instructions Manual

DUBIBING A TAPE MANUALLY
DUBBING THE WHOLE TAPE
CGA
o
.'
1,,3 c -
'%
'. j?
/—. .:.:.
amoca ..'-. (
,~D—
. .
Q
I.,
;&&;A?. j
— ..
.,/
,.'
2
, .——— _. —.. ...
2
m
Set the tape to the point where recording will start,
The raverse mode is automatically set to =.
Note ihat recording will be done on one side of the tape only.
1
2
3
4
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on faoing out from the unit.
Press the TAPE/DECK 1/2 button to select
deck 1.
"TP 1" is displayed.
Press the REC/REC MUTE button to start
recording.
Playing and recording start simultaneously.
To stop dubbing
Press the g button,
This function allows you to make exact copies of both sides of
the original tape. The reverse side of both tapes will Wart
simultaneously as soon as the longer tape has been reversed.
m
Dubbing does not start from a point halfway in the tape
The reverse mode is automatically set to Z).
1
2
3
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorde~
on first facing out from the unit.
Press the SYNCHRO DUBBING button once or
H
twice to start recording.
O For recording at normal speed,
press it once to display
NORM-DUB.
@ For recording at high speed,
press it twice to display
HIGH-DUB.
o
@
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press the button.
m
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.
ENGf./sH
14