Mass Storage Mode; Pc Cam Mode - LEXIBOOK BARBIE DIGITAL CAMERA User Manual

n indicates
Press the
. When
ithin 5
eted.
out 6
3] within 5
onds to
l its data
or DSC
creen.
r card will
p or down
1. Turn the digital video camera off.
2. Lift the USB connector cover. Plug the smaller connector of the USB
cable into the USB port on the camera. Plug the larger connector of the
USB cable to the USB port on your PC or notebook computer.
3. The icon will be displayed onscreen to indicate that the digital
camera is in Mass Storage mode.
4. Double-click My Computer /Removable Disk/DCIM/100JLCAM.
5. You can now copy the files to other drives of your PC.
Entering PC Cam mode
1. Turn the digital video camera off.
2. Press and hold the Shutter button [7], and connect the camera to
your computer using the USB cable provided.
3. Do not release the Shutter button [7] until the icon
the LCD screen. You are now in PC Cam mode. To view the real-time
images taken by the webcam, go to "My Computer" and double click
on the new drive called "Digital Camera".
Video Conference
1. Set your digital video camera to PC Cam mode.
2. Run the video conference software Microsoft NetMeeting on your
computer.
3. Input the IP address of the computer you wish to dial in the address
bar.
4. Select tool/accept/transfer options. When the other parties have
accepted your call, you can now hold a video conference.

MASS STORAGE MODE

PC CAM MODE

appears on
1