Enhancing Your System - Sharp CD-BA300 Operation Manual

Enhancing Your System

The connection cable is not included.
Purchase a commercially available cable as shown below.
Red White
28
BA300_P26_28 28
Listening to the playback sounds from VCR,
DVD, etc.
VCR, DVD, etc.
1
Use a connection cable to connect the VCR, DVD, etc. to the VIDEO/
AUX jacks.
When using video equipment, connect the audio output to this unit and the
video output to a television.
To the line
output jack
2
Press the ON/STAND-BY button to turn the power on.
3
Red
White
Press the VIDEO/AUX button.
4
Play the connected equipment.
Note:
To prevent hum interference, place this unit away from a television.
RCA cord
(not supplied) To record on a tape
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE I6
4
Press the 0/R
5
Play the VCR, DVD, etc.
Headphones
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME control.
I6 (I6 I6) button.
I6 I6 I6 I6
I6 I6
0/R (TAPE 2 0 0 0 0 0 ) button.
0/R 0/R
0/R
01.2.13, 2:14 PM