Listening To A Cd (Cds) - Sharp CD-BA300 Operation Manual

Listening to a CD (CDs)

This system can play audio CD-R and CD-RW discs just as CD discs, but cannot
perform recording.
16
Sound Control (See page 14)
*BA300_P16_17 16
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the 7 7 7 7 7 OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn
the disc tray, then place the CD in the open position.
CDs can be placed on any open position on the disc tray.
Be sure to place 3" (8 cm) CD(s) in the middle of the disc positions.
5
Press the 7 7 7 7 7 OPEN/CLOSE button to close the disc tray.
Music schedule
Total number of tracks on the CD
whose number is flashing
The music schedule will display only the number of tracks on the disc.
If the CD contains more than 15 tracks, " C " will appear.
6
To select the CD you want to listen to first, press one of s s s s s 1 - s s s s s 3
buttons.
00.11.16, 2:50 PM
5" (12 cm) 3" (8 cm)
Total playing time of the CD
whose number is flashing