Playing Sources With Dolby Digital Or Dts Sound - Pioneer Elite VSX-35TX Operating Instructions Manual

Playing Sources with Dolby Digital or DTS Sound

The following instructions show you how to play Dolby Digital or DTS sound sources with the VSX-35TX.
Î
USE SETUP
S0URCE RECEIVER
MULTI SYSTEM
OPERATION
OFF
VCR 1/
DVD/LD TV/SAT VCR2
DVR
MULTI CONTROL
CD-R/
CD TUNER TV CONT
TAPE 1
BAND
CLASS MPX DIRECT ACCESS
¶ 7 3 8
- -
+ +
TUNING STATION
1 ¡ 4 ¢
- +
DTV ON/OFF DTV MENU CHANNEL
1 2 3
4 5 6
7 8 9
GUIDE
EXIT
0
ENTER
DISC
+10
+ +
TV
TV VOL TV CONTROL VOLUME
– –
TV FUNC
REMOTE SETUP
INPUT
MENU MUTE
ATT
SYSTEM SETUP
+
EFFECT/ FUNCTION
CH SEL
ENTER
SIGNAL
DIGITAL
–
SELECT
NR
MULTI CH STEREO/
MIDNIGHT DSP
INPUT DIRECT
/DTS
THX ADVANCED STANDARD
LIGHT
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
2 4
1 Put the remote control slide switch in USE.
1
2 Press the RECEIVER
2
receiver.
3
Be sure that the standby indicator turns off on the front panel.
3 Press the MULTI CONTROL buttons or the
FUNCTION button (or turn the MULTI JOG
dial) to select the source you want to
playback.
The FUNCTION button cycles through the sources in the
following order:
7
DVD/LD
VCR 2
3
4 Choose a sound mode by pressing THX,
5
ADVANCED or STANDARD.
The default setting is STEREO.
4
(For more see "Sound Modes" and "Selecting a Sound Mode"
on p. 41-44.)
5 Press the SIGNAL SELECT button to select
the input signal. Set to AUTO.
(See "Switching ANALOG/DIGITAL Signal Input" on p. 47.)
6 Play a source (for example, a DVD player).
7 Adjust the volume by using the volume
buttons on the remote control or the
3
MASTER VOLUME on the front panel.
memo
• We recommend using different modes for different types of
DTS material. For watching movies, the THX or ADVANCED
THEATER setting should provide the best results. For listening
to music, the STANDARD, DIRECT, STEREO, or DSP modes
should serve the listener best.
7
• Make sure you connect your DVD/LD or LD player with the RF
demodulator. If your player has an
ensure you can use all LDs. Refer to p.15.
• If you are not able to get sound from the receiver the problem
may well lie with the SIGNAL SELECT button. You need to
make sure the input is set to the appropriate ANALOG or
DIGITAL setting. Refer to p. 47 for more on this.
• Some DVD players don't output DTS signals. For more details,
refer to the instruction manual supplied with your DVD player.
button to turn on the
TV/SAT CD
VCR 1/DVR VIDEO
2
Basic Playback
CD-R/TAPE 1
TUNER
PHONO
RF output this will
45