Recording From Audio Components - Pioneer Elite VSX-35TX Operating Instructions Manual

Recording from Audio Components

The following explanations show you how to record an analog or digital audio signal. Note that your analog
components cannot record a player that is only connected digitally (and vice-versa). If you want to record from a
digital component to an analog one (for example, a tape deck), or vice-versa, the digital component it must be
connected via analog jacks and you need to set the SIGNAL SELECT switch to ANALOG. To make exact digital
copies (of digital sources like CDs) both the source component and the recorder must be connected with digital
connections. See p.12 for more on analog audio connections and p.13 for digital audio connections.
The receiver's volume, channel level, balance, TONE, DIGITAL NR, MIDNIGHT, LOUDNESS and sur-
memo
round effects have no effect on the recorded signal and the MULTI CH IN cannot be recorded.
In some cases, digital recordings have copy guard protections and making a digital copy is not possible.
In this case you can only copy them in an analog manner.
Î
USE SETUP
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
VCR 1/
DVD/LD TV/SAT VCR2
DVR
MULTI CONTROL
CD-R/
CD TUNER TV CONT
TAPE 1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3 8
- + - +
TUNING STATION
1 ¡ 4 ¢
- +
DTV ON/OFF DTV MENU
CHANNEL
1 2 3
4 5 6
7 8 9
GUIDE EXIT
0
ENTER
DISC
+10
+ +
TV
TV VOL TV CONTROL VOLUME
– –
TV FUNC
REMOTE SETUP
INPUT
MENU MUTE
ATT
SYSTEM SETUP
+
EFFECT/ FUNCTION
CH SEL
ENTER
SIGNAL
DIGITAL
–
SELECT
NR
MULTI CH STEREO/
MIDNIGHT DSP
INPUT DIRECT
/DTS
THX ADVANCED STANDARD
LIGHT
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1 Select the source component. Set SIGNAL
SELECT according to the source
component's signal (ANALOG or DIGITAL).
1
Press the SIGNAL SELECT button on the remote control (or
use the button on the front panel) and choose ANALOG
2 Start recording with a recorder.
3 Playback the source to be recorded.
Record monitor (TAPE 2 MONITOR)
If you connect a cassette deck with a record monitor function to the
TAPE 2 MONITOR jacks, you can listen to the sound of an analog
recording as it is being recorded.
Press TAPE 2 MONITOR to switch between the sound of the
recording (TAPE 2 indicator on) and the sound of the source
1
component (TAPE 2 indicator off).
Using Other Functions
TAPE 2 MONITOR
71