Multi Channel Input (External Decoder) - Pioneer Elite VSX-35TX Operating Instructions Manual

TV
Connect your TV to the jacks as shown below. Hook up the signal with either component video, S-video, or
composite video cords (the quality descends in this order) but remember, the video component you are
watching and your TV must be hooked up with same type of video cord or you won't be able to see the picture.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
wall outlet.

Multi Channel Input (External Decoder)

In some cases you may want to have you source material (DVD, etc) decoded externally. If you find you need a
multi channel external decoder hook one up as shown below, but for most people this component is
unnecessary (For more on this see p.51).
Before making or changing the connections, switch off the power and disconnect the power cord from
the AC wall outlet.
Components equipped with
7.1 or 5.1 channel analog output jacks
ANALOG
CENTER
SURR- SUB
OUND BACK WOOFER
L
R
memo The COMPONENT VIDEO OUT jack can be used to get a TV picture
but it doesn't show this receiver's on screen display (OSD).
SURR- FRONT
OUND
L
L
R R
Connecting Your Equipment
TV/monitor
VIDEO IN
COMPO- VIDEO
NENT
Y
S-VIDEO
P
B
P
R
17