Input Mode - Denon AVR-3311 Owner's Manual

Setting items
Resolution Auto : The number of pixels the TV connected to the HDMI output
Set the output resolution. connector supports is detected automatically and the appropriate output
Resolution (Analog) : resolution is set.
Analog Video 480p / 576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution.
Resolution (HDMI) : HDMI
z
BD DVD TV • This item can be set when "i/p Scaler" is set to anything other than
"OFF".
SAT/CBL DVR
• When "i/p Scaler" is set to "Analog & HDMI", the resolution of both the
GAME z V.AUX DOCK
analog video input signal and HDMI input signal can be set.
NET/USB
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
signals.
• When set to "1080p/24Hz", you can enjoy film-like pictures for film
sources (in 24 Hz). For video sources and mixed sources, we recommend
setting the resolution to "1080p".
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output
at a resolution of 1080p/50Hz.
Progressive Mode Auto : The video signal is automatically detected and the appropriate
Set an appropriate mode is set.
progressive conversion Video1 : Select mode suitable for video playback
mode for the source video Video2 : Select mode suitable for video and 30-frame film material
signal. playback.
z
This item can be set when "i/p Scaler" is set to anything other than
BD DVD TV
"OFF".
SAT/CBL DVR
GAME z V.AUX DOCK
Aspect Full : Output at 16:9 aspect ratio.
Set the aspect ratio for the Normal : Output at 4:3 aspect ratio.
video signals output to the
"Aspect" can be set when "i/p Scaler" is set to anything other than
HDMI.
"OFF".
z
BD DVD TV
SAT/CBL DVR
GAME z V.AUX DOCK
NET/USB
z "TV" or "GAME" can be set when "HDMI" (vpage 69) or "Component" (vpage 70) has been
assigned.
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)

Input Mode

The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
• "HDMI" can be set for input sources for which "HDMI" is assigned at
"Input Assign" (vpage 69).
• "Digital" can be set for input sources for which "Digital" is assigned at
"Input Assign" (vpage 69).
• If the input source is set to "TV" or "Game", it cannot be set to "Analog".
• When digital signals are properly input, the
the display. If the
connector assignment and the connections.
• If "HDMI Control" is set to "ON" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
Decode Mode Auto : Detect type of digital input signal and decode and play automatically.
Set the decode mode for PCM : Decode and play only PCM input signals.
input source. DTS : Decode and play only DTS input signals.
BD DVD TV
• This item can be set for input sources for which "HDMI" or "Digital" is
SAT/CBL DVR
assigned at "Input Assign" (vpage 69).
DOCK GAME V.AUX
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
CD
inputting the corresponding input signal.
Rename
Change the display name of the selected input source.
Setting items
Rename • Up to eight characters can be input.
Change the display name of • For character input, see page 65.
the selected input source.
Default Yes : Reset to the defaults.
The input source name No : Do not reset to the defaults.
is returned to the default
setting.
Confirm the setting
ENGLISH
Input Setup
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check the digital input
Setting details
Return to previous menu
71