Denon AVR-3311 Owner's Manual page 117

ENGLISH
GAudioH
Symptom
Audio is not output. • Check the connections for all devices.
• Check the speaker connections.
• Check whether the audio device power is turned on.
• Adjust the master volume.
• Cancel the mute mode.
• Select a suitable input source.
• Select a suitable input mode.
• Disconnect the headphones. No sound is output from the speakers
or the PRE OUT connectors when headphones are connected.
No sound is • Check if the surround speakers are connected to the SURROUND
produced from terminals.
surround speaker.
No sound is • Set "Amp Assign" on the menu to "Normal".
produced from • Set "Speaker Config." – "S.Back" on the menu to something
surround back other than "None".
speaker. • Set "Surround Parameter" – "S.Back" on the menu to something
other than "OFF".
• Set the surround mode to something other than "STEREO".
No sound is • Set "Surround Parameter" – "F.Height" on the menu to "ON".
produced from front • Set "Amp Assign" on the menu to "Normal".
height speaker. • Set "Speaker Config." – "Surround" on the menu to something
other than "None".
No sound is • Check the subwoofer connections.
produced from • Turn on the subwoofer's power.
subwoofer. • Set "Speaker Config." – "Subwoofer" on the menu to "Yes".
• If "Front" and "Center" for "Speaker Config." are set to "Large",
and "Subwoofer Mode" is set to "LFE", no sound may be output
from the subwoofers, depending on the input signal or selected
surround mode.
DTS sound is not • Set "Decode Mode" on the menu to "Auto" or "DTS".
output.
Dolby TrueHD, DTS- • Make HDMI connections.
HD, Dolby Digital
Plus audio is not
output.
114
Cause/Solution
5, 14 – 23
5, 50 – 52
5, 50 – 52
GHDMIH
Page Symptom
No audio is • Check the connection of the HDMI connectors.
output with HDMI • When outputting HDMI audio from the speakers, set "HDMI
– connection. Audio Out" on the menu to "AMP".
24, 62 • When outputting HDMI audio from a TV, set "HDMI Audio Out"
25, 62 on the menu to "TV".
24, 62
No video is • Check the connection of the HDMI connectors.
71
output with HDMI • Set the input source to match the connected HDMI connector.
100
connection. • Check whether the TV is compatible with copyright protection
(HDCP). If connected to a device not compatible with HDCP, video
– will not be output correctly.
When the following • Set "HDMI Control" on the menu to "OFF". To operate power
operations are only for each device, set "Power Off Control" to "OFF".
79 performed on
80 devices compatible
with HDMI control,
74 the same operations
occur on this unit.
47 • Power ON/OFF
• Switching audio
74
output devices
79
• Adjust volume
80
• Switch input source
GSIRIUS Satellite RadioH
6
Symptom
80
"CHECK SIRIUS • The SiriusConnect Home Tuner unit is not connected. Check that
80
TUNER" is displayed. the connections are correct.
"ANTENNA ERROR" • The antenna is not connected. Check that the connections are
is displayed. correct.
71 "NO SIGNAL" is • The antenna is not connected. Check that the connections are
displayed. correct.
14 "INVALID • Channel is not present. Select another channel.
CHANNEL" is
displayed.
"ACQUIRING • The signal cannot be received. Reposition your SiriusConnect
SIGNAL" is Home Tuner and Home Dock antenna.
displayed. • Displays while SiriusConnect Home Tuner is connected. Reposition
your SiriusConnect Home Tuner and Home Dock antenna.
z
"Call SIRIUS" is • Channels are not subscribed to. If you subscribe to the channel,
displayed. you can receive the channel.
"SUBSCRIPTION • While updating contract information.
UPDATED" is
displayed.
"Enter Lock Code • Selected channels are locked. Please insert pass word (4 digits)
[ ]" is displayed. into "[
z After scroll displays "Call 888-539-...." twice, displays "Call SIRIUS".
Cause/Solution
Cause/Solution
]"
Page
14
82
82
14
14, 24
14
54, 82
Page
20
20
–
–
–
–
–
–
–