Sleep Operation - Haier HSU-12RUE03 Operatiing Manual

Operation

Sleep Operation

Before going to bed, you can simply press the
SLEEP button and unit will operate in SLEEP
mode and bring you a sound sleep.
Use of SLEEP function
After the unit starts, set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts, temp. will
become 1 C higher than temp. setting. After
O
another 1 hours, temp. rises by 1
The unit will run for further 6 hours then stops.
Temp. is higher than temp. setting so that room
temperature won't be too Iow for your sleep.
Remote Controller
TEMP
HEALTH FAN
SWING
MODE H.AIR.
SLEEP FRESH
CLOCK SET
TIMER
LOCK LIGHT CODE RESET
C further.
O
2.
3.
15
SLEEP operation starts
Approx.6hrs
Rises 1
1 hr
Rises 1 O C
1 hr
Temp.setting
In COOL, DRY mode
In HEAT mode
1 hours after SLEEP mode starts, temp
will become 2 C lower than temp.
O
setting. After another 1 hours, temp
decrease by 2 C further. After more
O
another 3 hours, temp. rises by 1
further. The unit will run for further 3
hours then stops. Temp. is lower than
temp. setting so that room temperature
won't be too high for your sleep.
Temp.setting
1 hr
Decreases 2
1 hr
Decreases 2
3 hrs
SLEEP
operation starts
In HEAT mode
In AUTO mode
The unit operates in corresponding sleep
mode adapted to the automatically selected
operation mode.
4. In FAN mode
It has no SLEEP function.
5.Set the wind speed change when sleeping
If the wind speed is high or middle before
setting for the sleep, set for lowing the wind
speed after sleeping.
If it is low wind, no change.
SLEEP operation stops
C
O
Unit stop
C
O
Unit stop
C
O
C
O
3 hrs
Rises 1 C
O
SLEEP
operation stops