Table of Contents
Advertisement
Installation
12. Under the "Capture Settings" screen set the Video Capture
Device to "DVcam Capture", the Audio Capture Device to "DV
Audio" then click "OK".
13. Once you are back on the "Capture Screen"(Video Wave Main
screen), click the "Video+Audio" button to begin capturing.
14. If you are in VideoWave and want to turn off the camcorder,
you will need to exit VideoWave and then turn off the
camcorder. Otherwise, VideoWave stops responding and you
will need to exit VideoWave and restart the program to use it.
15. Most camcorders shut down to save battery power when they
are not used. If you are in VideoWave and this happens (you
have chosen standby mode), then you will need to exit
VideoWave, turn on the camcorder to record instead of
standby mode if you intend to capture a long video stream
(usually more than 10 minutes).
(continued)
12
Advertisement
Table of Contents
