Page 1
P73631_F5U122-PC-man.qxd 4/26/01 10:14 AM Page 1 USB 10/100 Ethernet Adapter User Manual F5U122-PC P73631...
Page 2
The provided software supports Windows 98, Windows 98 SE, Windows Me, and Windows 2000. This manual explains the features and specifications of the adapter and how to properly connect and use the Belkin USB 10/100 Ethernet Adapter hardware and software with your PC and network environment.
Page 3
Compatible with Windows 98, 98 SE, Me, and 2000 • Automatically detects network speed: 10Base-T or 100Base-TX • Requires no external power • Compatible with USB 1.0 and 1.1 specifications and meets all IEEE Ethernet standards • Belkin Lifetime Warranty and technical support 10:14 AM Page 2...
P73631_F5U122-PC-man.qxd 4/26/01 Technical Specifications Package Dimensions: Connector (Ethernet): RJ45 Connector (USB): Weight: Power Requirements: Power Consumption: Mode Mode Data Transfer Rate Can exceed 6Mbps (depending on the computer, operating system, communication protocol, and network environment) Environmental Conditions Operating Range: Storage Range: Humidity: Red: 10:14 AM...
Page 5
System Requirements • PC with one free USB Port • Windows 98, 98 SE, Me, or 2000 Package Includes • Belkin USB 10/100 Ethernet Adapter • Belkin USB Device Cable • Category 5 Ethernet Cable • Installation Disk • User Guide...
P73631_F5U122-PC-man.qxd 4/26/01 10:14 AM Page 5 Hardware Installation A USB cable and network cable are provided for connection of your equipment Caution: If you choose to use a USB hub, the hub must be externally powered. In order to use the adapter, you must install drivers in the USB host PC as described in the following sections.
Page 7
P73631_F5U122-PC-man.qxd 4/26/01 Hardware Installation USB Ethernet Adapter USB-B connector USB-A Figure 2-1: Basic PC-to-Ethernet Port Connection Figures 2-2, 2-3, and 2-4 illustrate sample applications f o r USB Ethernet Adapter Figure 2-2: PC-to-PC Direct Connections Note: Use and ethernet cross-cable between the two Ethernet adapters for this application.
Page 8
P73631_F5U122-PC-man.qxd 4/26/01 10:14 AM Page 7 Hardware Installation (continued) USB Ethernet Adapter Ethernet Hub Figure 2-3: PC-to-Ethernet Network Connections Cable Modem USB Ethernet Figure 2-4: PC-to-Cable Modem or xDSL Modem Connections...
98/Windows 1 . Close any Windows applications that may be running on your computer. 2 . Insert the Belkin USB 10/100 Ethernet Adapter floppy disk into your floppy drive. 3 . Connect the USB cable to your computer and connect the cable to the USB Ethernet Adapter.
Page 10
® 1 . Close any Windows applications that you may be running on your computer. 2 . Insert the Belkin USB 10/100 Ethernet Adapter floppy disk into your floppy drive. 3 . Connect the USB cable to your computer and connect the cable to the USB Ethernet Adapter.
Page 11
6 . The system may prompt you to insert your Windows Me CD. Insert the CD and select "OK" . 7 . The "Add New Hardware Wizard" will indicate, "Belkin USB Ethernet Adapter" and "Windows has finished installing the hardware device" . Click "Finish" .
Page 12
Click "Finish" to complete the installation. Once your computer has restarted, the Belkin USB 10/100 Ethernet Adapter will be active and working. If you are connecting to a cable modem or xDSL modem, follow the directions that came with your modem or from your Internet provider.
Page 13
USB Ethernet Adapter icon should be v i s i b l e . 3 . To configure TCP/IP settings, select "TCP/IP -> Belkin USB Ethernet Adapter" and click "Properties". To specify an IP address select "Specify an IP address" .
Page 14
USB Ethernet Adapter icon should be v i s i b l e . 4 . To configure TCP/IP settings, select "TCP/IP -> Belkin USB Ethernet Adapter" and click "Properties" . To specify an IP address select "Specify an IP address" .
Page 15
1 . Select "My Computer" / "Control Panel" / Network and Dial-up Connections" . 2 . Select "Local Area Connection X" that corresponds to the Belkin Ethernet Adapter. If you have more than one network interface device, Windows labels them in sequential order starting at 1. The Belkin Ethernet Adapter should be the latest network device that was installed and therefore the latest number.
Warranty Belkin Components warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge, provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.