Advertisement
Setting Up the Wireless (Wi-Fi) Connection
4. If the name of your network is:
Listed
Press
to select your
network, then press
OK.
5. If your network has security enabled, use the LCD keyboard to enter your security string.
6. When the confirmation message appears, press OK.
If the printer is successfully connected, the Wi-Fi status light should be on.
If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking.
7. When the printer is successfully connected, install the KODAK All-in-One Printer Software on your
computer. Follow the on-screen instructions to complete your setup.
Connecting to a WPS wireless router
1. Press Home.
2. Press
to select Network Settings, then press OK.
3. With WiFi Setup Wizard selected, press OK.
NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard.
4. With WPS Connect selected, press OK.
5. Select one of these two methods of connecting:
IMPORTANT: Before you press
enter the generated PIN. If necessary, consult your Internet service provider or router
manufacturer's documentation for more information.
a. With Push Button Configuration selected, press OK.
b. Press or select the WPS button for your wireless router.
NOTE: You will have two minutes to press or select the
WPS button. It may be a button on the device or a
virtual button in the device's software.
6. When the confirmation message appears, press OK.
If the printer is successfully connected, the Wi-Fi status light should be on.
If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking.
7. When the printer is successfully connected, install the KODAK All-in-One Printer Software on your
computer. Follow the on-screen instructions to complete your setup.
3
Make sure your wireless router is turned on and within range. If your wireless
router does not broadcast its SSID:
a. Press
to select Unlisted network, then press OK.
b. Use the LCD keyboard to enter your network name.
c. Select WEP or WPA/WPA2 as required for your network's security
setup, then press OK.
on the printer, make sure you know where the router's button is, or where to
Pressing a Button
www.kodak.com/go/aiosupport
Not Listed
Entering a PIN
a. Press
to select Generate WPS
PIN, then press OK.
b. In your wireless router's software,
locate the PIN screen.
c. Enter the PIN you received from the
LCD into the PIN screen.
Advertisement
