Kodak 1400 User Manual page 27

7. Grasp the ribbon carrier by the handle, and slide the spool onto the two
hubs on the left side.
Hubs
8. Push the ribbon carrier against the hubs on the left until it can engage the
two holders on the right.
9. Turn the supply spool until the ribbon is taut.
10. Close the top cover.
CONTENTS
PRINTER DRIVER GUIDE
Holder
HELP
SEARCH
Introduction
Setting up the 1400
Printer
Operating the 1400
Printer
Troubleshooting
Site Specifications
Accessories and
Supplies