Ide Configuration - ASROCK X58 EXTREME - V1.1 User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
3 . 4 . 4

3 . 4 . 4 IDE Configuration

3 . 4 . 4 IDE Configuration IDE Configuration IDE Configuration
3 . 4 . 4 3 . 4 . 4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
SATAII Configuration
Configure SATAII as
Onboard IDE and 1394
Onboard eSATAII
eSATAII Operation Mode
SATAII 1
SATAII 2
SATAII 3
SATAII 4
SATAII 5
SATAII 6
IDE1 Master
IDE1 Slave
eSATAII
AHCI CD/DVD Boot Time out
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
SATAII Configuration
Please select [Compatible] when you install legacy OS. If native OS
(Windows ® XP / Vista TM
option "Configure SATAII as", you are allowed to set the selection to [IDE],
[RAID] or [AHCI]. The default value is [IDE].
If you select [RAID] or [AHCI] mode, the options "Hot Plug" and "SATA Link
Power Management" will appear.
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.
Onboard IDE and 1394
Use this item to enable or disable onboard IDE and 1394. The default value
is [Enabled].
Onboard eSATAII
Use this item to enable or disable onboard eSATAII. The default value is
[Enabled].
® TM
Vista certification.
Options
[Enhanced]
Disabled
[IDE]
Compatible
[Enabled]
Enhanced
[Enabled]
[IDE]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen Select Screen
[Not Detected]
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
[Not Detected]
F1 F1 General Help General Help
[Not Detected]
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
[35]
ESC ESC Exit Exit
) is installed, please select [Enhanced]. Then in the
6 5 6 5 6 5
6 5 6 5