ASROCK X58 EXTREME - V1.1 User Manual page 55

3.3 3.3 OC T 3.3 OC T OC T OC Tweak weak weak weaker Screen er Screen er Screen er Screen
3.3 3.3 OC T weak er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
OC Tweaker Settings
Load CPU EZ OC Setting
Load DDR3 EZ OC Setting
Overclock Mode
BCLK Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Spread Spectrum
Current Setting : 20-4.800GT-2133MHz-DDR3_1066
CPU Ratio
QPI Frequency
Uncore Frequency
DRAM Frequency
XMP Frequency
Profile 1 : DDR3 2000 9-9-9-24 1.65V
DRAM Timing Control
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Load CPU EZ OC Setting
You can use this option to load CPU EZ overclocking setting. Configuration
options: [3.60GHz], [3.70GHz], [3.80GHz], [3.90GHz], [4.00GHz] and
[4.20GHz]. Please note that overclocing may cause damage to your CPU
and motherboard. It should be done at your own risk and expense.
Load DDR3 EZ OC Setting
You can use this option to load DDR3 EZ overclocking setting. Please note
that overclocing may cause damage to your memory and motherboard. It
should be done at your own risk and expense.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual],
[I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual],
Untied Overclocking function is enabled. Please refer to page 52 for the
details of Untied Overclocking Technology. Therefore, you are allowed to
adjust the Host frequency and PCIE frequency in the following two items.
If you select [I.O.T.] (Intelligent Overclocking Technology), the system will
automatically enable the overclocking function when your CPU is heavy
loaded.
BCLK Frequency (MHz)
Use this option to adjust BCLK (Internal Base Clock) frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Overclocking may cause
[Press Enter]
damage to your CPU and
[Press Enter]
motherboard.
It should be done at
[Auto]
your own risk and
[133]
expense.
[100]
[Enabled]
[Auto]
[Auto]
Select Screen
[Auto]
Select Item
[Auto]
Enter Go to Sub Screen
[Auto]
F1 General Help
[Auto]
F9 Load Defaults
F10 Save and Exit
ESC Exit
5 5 5 5 5 5
5 5 5 5
Exit