Cpu Configuration - ASROCK X58 EXTREME - V1.1 User Manual

3 . 4 . 1 CPU Configuration

3 . 4 . 1 3 . 4 . 1 CPU Configuration CPU Configuration CPU Configuration
3 . 4 . 1 3 . 4 . 1 CPU Configuration
BIOS SETUP UTILITY
Advanced
Configure advanced CPU settings
Intel (R) Core (TM) i7 CPU 920
Frequency : 2.66GHz
Cache L1 : 128KB
Cache L2 : 1024KB
Cache L3 : 8192KB
Ratio Status Unlocked (Min:12, Max:20)
Ratio Actual Value 20
CPU Ratio
[Auto]
Enhanced Halt State
[Disabled]
Intel (R) Virtualization tech.
[Enabled]
CPU Thermal Throttling
[Enabled]
No-Excute Memory Protection
[Disabled]
Hyper Threading Technology
[Enabled]
Active Processor Cores
[Auto]
A20M
[Disabled]
Intel (R) SpeedStep(tm) tech
[Auto]
Intel (R) TurboMode tech
[Enabled]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Ratio
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard.
Enhance Halt State
All processors support the Halt State (C1). The C1 state is supported
through the native processor instructions HLT and MWAIT and requires no
hardware support from the chipset. In the C1 power state, the processor
maintains the context of the system caches.
Intel (R) Virtualization tech.
When this option is set to [Enabled], a VMM (Virtual Machine Architecture)
can utilize the additional hardware capabilities provided by Vanderpool
Technology. This option will be hidden if the installed CPU does not support
Intel (R) Virtualization Technology.
CPU Thermal Throttling
You may select [Enabled] to enable CPU internal thermal control mechanism
to keep the CPU from overheated.
No-Excute Memory Protection
No-Execution (NX) Memory Protection Technology is an enhancement to
the IA-32 Intel Architecture. An IA-32 processor with "No Execute (NX)
Memory Protection" can prevent data pages from being used by malicious
software to execute code. This option will be hidden if the current CPU
does not support No-Excute Memory Protection.
Select the ration
between CPU Core
@ 2.67GHz
Clock and the FSB
Frequency.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
6 0 6 0 6 0
6 0 6 0