ASROCK X58 EXTREME - V1.1 User Manual page 8

- Hybrid Booster:
- CPU Frequency Stepless Control (see CAUTION 11)
- ASRock U-COP (see CAUTION 12)
- Boot Failure Guard (B.F.G.)
Hardware - CPU Temperature Sensing
Monitor - Chassis Temperature Sensing
- CPU/Chassis/NB/Power Fan Tachometer
- CPU Quiet Fan
- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore
OS - Microsoft
compliant
Certifications - FCC, CE, WHQL
* For detailed product information, please visit our website: http://www.asrock.com
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
CAUTION!
1. About the setting of "Hyper Threading Technology", please check page 61.
2. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 52 for details.
3. This motherboard supports Triple Channel Memory Technology. Be-
fore you implement Triple Channel Memory Technology, make sure to
read the installation guide of memory modules on page 18 for proper
installation.
4. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
®
and Windows Vista
64-bit with 64-bit CPU, there is no such limitation.
5. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-
channel, 6-channel, and 8-channel modes. Please check the table on
page 13 for proper connection.
6. Before installing SATAII hard disk to SATAII connector, please read the
"SATAII Hard Disk Setup Guide" on page 42 to adjust your SATAII hard disk
drive to SATAII mode. You can also connect SATA hard disk to SATAII
connector directly.
7. Power Management for USB 2.0 works fine under Microsoft
Vista TM 64-bit / Vista
® Windows ® XP / XP 64-bit / Vista
TM ®
. For Windows XP 64-bit and Windows
TM / XP 64-bit / XP SP1 or SP2.
8 8 8 8 8
TM / Vista TM 64-bit
®
XP
® TM
Vista
® ®
Windows