Installation Of Memory Modules (Dimm); Installing A Dimm - ASROCK K7UPGRADE Installation Manual

2.2 Installation of Memory Modules (DIMM)

2.2 Installation of Memory Modules (DIMM) 2.2 Installation of Memory Modules (DIMM)
2.2 Installation of Memory Modules (DIMM) 2.2 Installation of Memory Modules (DIMM)
K7Upgrade-600 motherboard provides two 184-pin DDR (Double Data Rate) DIMM
slots.

Installing a DIMM

Installing a DIMM Installing a DIMM
Installing a DIMM Installing a DIMM
Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
STEP 1: Unlock a DIMM slot by pressing the retaining clips outward.
STEP 2: Align a DIMM on the slot such that the notch on the DIMM matches the
break on the slot.
The DIMM only fits in one correct orientation. It will cause permanent
damage to the motherboard and the DIMM if you force the DIMM into the
slot at incorrect orientation.
STEP 3: Firmly insert the DIMM into the slot until the retaining clips at both ends
fully snap back in place and the DIMM is properly seated.
8 8 8 8 8
ASRock K7Upgrade-600 Motherboard