After that, please insert Windows
the optical drive again to continue the installation.
NOTE. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
2.19 Untied Overclocking T
2.19
2.19
Untied Overclocking T
Untied Overclocking Technology
Untied Overclocking T
2.19
2.19
Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup
to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied
during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate
under a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.
Vista
/ Windows
Vista
®
TM
®
Vista
/ Windows
Vista
64-bit on IDE HDDs and want to
®
TM
®
TM
echnology
echnology
echnology
echnology
5 0
5 0
5 0
5 0
5 0
64-bit optical disk into
TM