Driver Installation Guide; Installing Windows ® Xp / Xp 64-Bit / Vista; Without Raid Functions; Installing Windows Xp / Xp 64-Bit Without Raid Functions - ASROCK K10N78 - V1.1 User Manual

2.16 Driver Installation Guide

2.16 2.16 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2.16 2.16 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.17 Installing Windows 2.17 2.17 2.17 2.17 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista 64-bit W 64-bit Without RAID F 64-bit W
Vista Vista TM TM 64-bit W 64-bit W
TM TM TM
If you want to install Windows
Vista 64-bit on your SATA / SATAII HDDs without RAID functions, please follow below
TM
procedures according to the OS you install.
2.17.1 Installing Windows 2.17.1 Installing Windows
2.17.1 Installing Windows 2.17.1 Installing Windows 2.17.1 Installing Windows
Functions Functions Functions Functions Functions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs / eSATAII devices with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C. When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please choose:
1. Generate AHCI Driver diskette for WindowsXP
2. Generate RAID Driver diskette for WindowsXP
3. Generate AHCI Driver diskette for WindowsXP64
4. Generate RAID Driver diskette for WindowsXP64
5. Exit
Reboot system now
Press any key to continue
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
®
ithout RAID F ithout RAID Functions ithout RAID F unctions unctions unctions
ithout RAID F unctions
XP, Windows XP 64-bit, Windows
® ®
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
®
XP / Windows XP 64-bit on your SATA / SATAII HDDs
® ®
Advanced screen
XP / XP 64-bit.)
®
4 6 4 6 4 6 4 6 4 6
/ / / / /
TM TM TM TM TM
Vista or Windows
® TM ®
IDE Configuration.