Installation; Driver Installation Guide; Untied Overclocking Technology - ASROCK G41M-VS User Manual

Hide thumbs Also See for G41M-VS:
Table of Contents

Advertisement

This Manual: http://www.manuallib.com/file/2441117
2 . 1 0 Serial A
2 . 1 0
2 . 1 0
2 . 1 0
2 . 1 0
Serial A
Serial A
Serial AT T T T T A (SA
Serial A
A (SA
A (SA
A (SA
A (SAT T T T T A) / Serial A

Installation

Installation
Installation
Installation
Installation
This motherboard adopts Intel
(SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks
on this motherboard for internal storage devices. This section will guide you to
install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
2 . 1 1
2 . 1 1
2 . 1 1
2 . 1 1

2 . 1 1 Driver Installation Guide

Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 2
2 . 1 2
2 . 1 2
2 . 1 2
2 . 1 2 Untied Overclocking T
Untied Overclocking T
Untied Overclocking T

Untied Overclocking Technology

Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of
BIOS setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB
can operate under a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.
2 4
2 4
2 4
2 4
2 4
A) / Serial A
A) / Serial A
A) / Serial AT T T T T AII (SA
A) / Serial A
AII (SA
AII (SA
AII (SA
AII (SAT T T T T AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
ICH7 south bridge chipset that supports Serial ATA
®
echnology
echnology
echnology
echnology

Advertisement

Table of Contents
loading

Table of Contents