Installation - ASROCK K10N78 - V1.1 User Manual

2.13 Serial A 2.13 2.13 Serial A Serial AT T T T T A (SA Serial A A (SA A (SAT T T T T A) / Serial A A (SA
2.13 2.13 Serial A A (SA

Installation

Installation Installation Installation Installation
This motherboard adopts NVIDIA
(SATA) / Serial ATAII (SATAII) hard disks and RAID functions. You may install SATA /
SATAII hard disks on this motherboard for internal storage devices. This section will
guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0, RAID 1 or JBOD function, you need to install at
least 2 SATA / SATAII hard disks. If you plan to use RAID 5 function, you
need to install 3 SATA / SATAII hard disks. If you plan to use RAID 0+1
function, you need to install 4 SATA / SATAII hard disks.
2. For K10N78-1394, it is recommended to build RAID on internal SATAII
ports. In other words, if SATAII_6 (PORT5) is used for eSATAII port,
please build RAID on other SATAII ports.
3. Under IDE mode, SATAII_5 (PORT4) and SATAII_6 (PORT5) cannot
function.
A) / Serial AT T T T T AII (SA A) / Serial A A) / Serial A AII (SAT T T T T AII) Hard Disks AII (SA AII (SA
A) / Serial A AII (SA
GeForce 8200 chipset that supports Serial ATA
®
4 2 4 2 4 2 4 2 4 2
AII) Hard Disks AII) Hard Disks AII) Hard Disks
AII) Hard Disks