Installing Windows ® 2000 / Xp / Xp 64-Bit / Vista; Vista Tm 64-Bit Without Raid Functions; Installing Windows ® 2000 / Xp / Xp 64-Bit; Without Raid Functions - ASROCK 775XFIRE-VSTA - V1.2 User Manual

2.17 Installing Windows 2.17 2.17 Installing Windows Installing Windows Installing Windows
2.17 2.17 Installing Windows
Vista Vista Vista Vista Vista 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions
TM TM TM
TM TM
If you want to install Windows
on your SATA HDDs without RAID functions, please follow below procedures
according to the OS you install.
The installation procedures for Windows
change. Please visit our website for the updates of Windows
driver and related information in the future.
2.17.1 2.17.1 2.17.1 2.17.1 2.17.1 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
RAID Functions RAID Functions RAID Functions
RAID Functions RAID Functions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "ATA/IDE Configuration" to [Enhanced], and then in the option
"Configure SATA as", please set the option to [AHCI].
STEP 2: Make a SATA driver diskette.
Please make a SATA driver diskette by following section 2.16.1 step 2 on page 32.
STEP 3: Install Windows
After making a SATA driver diskette, you can start to install Windows
64-bit on your system. At the beginning of Windows
third-party AHCI driver. When prompted, insert the SATA driver diskette containing
the Intel AHCI driver. After reading the floppy disk, the driver will be presented.
®
Select the driver to install according to the mode you choose and the OS you install.
You may select: "Intel(R) 82801FR SATA AHCI Controller (Desktop ICH6R-Windows
XP/2000)" for Windows XP/2000 or "Intel(R) 82801FR SATA AHCI Controller (Desktop
®
ICH6R-Windows XP64)" for Windows
Using SATA HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "ATA/IDE Configuration" to [Enhanced], and then in the option
"Configure SATA as", please set the option to [IDE].
STEP 2: Install Windows
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
®
2000 / XP / XP 64-bit / Vista
®
Vista / Vista
® TM
2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without
®
2000 / XP / XP 64-bit OS on your SATA HDDs
®
Advanced screen
®
2000 / XP / XP 64-bit OS on your system.
XP 64-bit.
®
Advanced screen
® 2000 / XP / XP 64-bit OS on your system.
3 6 3 6 3 6
3 6 3 6
/ / / / /
TM TM TM TM TM
/ Vista 64-bit OS
TM TM
64-bit are subject to
TM
Vista / Vista 64-bit
® TM TM
IDE Configuration.
2000 / XP / XP
®
setup, press F6 to install a
®
IDE Configuration.