Installing Windows ® 2000 / Xp / Xp 64-Bit / Vista; Vista Tm 64-Bit Without Raid Functions; Installing Windows ® 2000 / Xp / Xp 64-Bit Without - ASROCK P45XE User Manual

2 . 1 9 2 . 1 9 Installing Windows 2 . 1 9 Installing Windows Installing Windows Installing Windows
2 . 1 9 2 . 1 9 Installing Windows
Vista Vista Vista Vista Vista 64-bit W 64-bit W 64-bit W 64-bit W 64-bit Without RAID F
TM TM TM
TM TM
If you want to install Windows
on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
Since Windows
vendor, RAID / AHCI functions are not supported under Windows
2.19.1 2.19.1 2.19.1 2.19.1 2.19.1 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
W W W W Without RAID F ithout RAID Functions ithout RAID F ithout RAID F
ithout RAID F
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.18.1 step 2 on
page 44.
®
STEP 3: Install Windows
not supported.)
After making a SATA / SATAII driver diskette, you can start to install Windows
64-bit on your system. At the beginning of Windows
party AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing
the Intel AHCI driver. After reading the floppy disk, the driver will be presented. Select
®
the driver to install according to the mode you choose and the OS you install. You may
select: "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP)" for Windows
XP or "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP64)" for Windows
XP 64-bit.
Using SATA / SATAII HDDs and eSATAII devices without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
STEP 2: Install Windows ®
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
® ® ® ® ®
ithout RAID F ithout RAID F ithout RAID F ithout RAID Functions unctions unctions unctions unctions
2000 / XP / XP 64-bit / Vista
®
2000 RAID / AHCI driver is not provided by the chipset
®
2000 / XP / XP 64-bit 2000 / XP / XP 64-bit 2000 / XP / XP 64-bit 2000 / XP / XP 64-bit 2000 / XP / XP 64-bit
® ® ® ® ®
unctions unctions unctions
unctions
2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs
®
Advanced screen
XP / XP 64-bit OS on your system. (Windows
setup, press F6 to install a third-
®
Advanced screen
2000 / XP / XP 64-bit OS on your system.
4 8 4 8 4 8
4 8 4 8
TM TM TM TM TM
/ Vista 64-bit OS
TM TM
2000.
®
IDE Configuration.
®
2000 is
XP / XP
®
IDE Configuration.
/ / / / /
®
®