ASROCK 775XFIRE-VSTA - V1.2 User Manual page 27

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB67)
(see p.11 No. 20)
USB 2.0 Header
(9-pin USB45)
(see p.11 No. 21)
Infrared Module Header
(5-pin IR1)
(see p.11 No. 19)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.11 No. 26)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.11 No. 24)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power supply
power cable to the power
connector of the power supply.
HD 8CH I/O Panel accommo-
USB_PWR dates 4 default USB 2.0 ports. If
P-7
P+7
those USB 2.0 ports on the I/O
GND
DUMMY
panel are not sufficient, this
1
USB 2.0 header is available to
GND
P+6
support 2 additional USB 2.0
P-6
USB_PWR
ports.
HD 8CH I/O Panel accommo-
dates 4 default USB 2.0 ports. If
USB_PWR
P-5
P+5
those USB 2.0 ports on the I/O
GND
DUMMY
panel are not sufficient, this
1
USB 2.0 header is available to
GND
P+4 support 2 additional USB 2.0
P-4
USB_PWR
ports.
IRTX
This header supports an
+5VSB
DUMMY
optional wireless transmitting
1
and receiving infrared module.
GND
IRRX
This connector allows you
to receive stereo audio input
CD-L
GND
GND from sound sources such as
CD-R
a CD-ROM, DVD-ROM, TV
CD1
tuner card, or MPEG card.
This is an interface for front
GND
PRESENCE#
MIC_RET
panel audio cable that allows
OUT_RET
convenient connection and
control of audio devices.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
2 7 2 7 2 7
2 7 2 7