ASROCK 775XFIRE-VSTA - V1.2 User Manual page 29

ATX Power Connector
(20-pin ATXPWR1)
(see p.11 No. 3)
ATX 12V Connector
(4-pin ATX12V1)
(see p.11 No. 2)
SLI/XFIRE Power Connector
(4-pin SLI/XFIRE_POWER1)
(see p.11 No. 33)
Game Port Header
(15-pin GAME1)
(see p.11 No. 23)
HDMI_SPDIF Header
(3-pin HDMI_SPDIF1)
(see p.11 No. 25)
HDMI_SPDIF Cable
(Optional)
A. black end
+5V
SPDIFOUT
blue
GND black
Please connect an ATX power
supply to this connector.
Please connect an ATX 12V
power supply to this connector.
It is not necessary to use this
connector, but please connect it
with a hard disk power connecor
when two graphics cards are
SLI/XFIRE_POWER1
plugged to this motherboard at
the same time.
+5V Connect a Game cable to this
JBB1
JBX
header if the Game port bracket
MIDI_OUT
JBY
JBB2 is installed.
MIDI_IN
1
+5V
JAB2
JAY
GND
GND
JAX
JAB1
+5V
HDMI_SPDIF header, providing
SPDIF audio output to HDMI VGA
1
card, allows the system to
GND
connect HDMI Digital TV/
SPDIFOUT
+5V
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Please connect the black end (A)
of HDMI_SPDIF cable to the
C
HDMI_SPDIF header on the
B
motherboard. Then connect the
A
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
B. white end (2-pin) C. white end (3-pin)
SPDIFOUT
blue
GND black
2 9 2 9 2 9
2 9 2 9
SPDIFOUT
blue
GND black