Table of Contents
Advertisement
CPU Quiet Fan
This item allows you to identify the temperature of CPU fan. If you set this
option as [Disabled], the CPU fan will operate in full speed. If you set this
option as [Enabled], you will find the items "Target CPU Temperature
( C)", "Tolerance ( C)", and "Minimun Fan Speed" appear to allow you
adjusting them. The default value is [Disabled].
Target CPU Temperature ( C)
The target temperature will be between 50 C and 65 C. The default
value is [50].
Tolerance ( C)
The default value of tolerance is [2], which means the error of the
target CPU temperature will be within 2 C.
Minimun Fan Speed
You can use this option to set the minimun fan speed. The default value
is [90%]. Configuration options: [90%] and [85%]. The CPU fan speed
will be controlled at the rate of 90% or 85%.
3.5
3.5
Boot Screen
Boot Screen
3.5
3.5 Boot Screen
3.5
Boot Screen
Boot Screen
In this section, it will display the available devices on your system for you to config-
ure the boot settings and the boot priority.
Main
Advanced
Boot Settings
Boot Settings Configuration
1st Boot Device
2nd Boot Device
3rd Boot Device
Hard Disk Drives
Removable Drives
CD/DVD Drives
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
H/W Monitor
Boot
Security
Configure Settings
during System Boot.
[1st Floppy Device]
[HDD: PM - HDS722580VL]
[CD / DVD: 3S - CD - ROM C]
Enter Go to Sub Screen
F1
F9
F10
ESC
3 5
3 5
3 5
3 5
3 5
Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit
Advertisement
Table of Contents
