3.7 Boot Screen
In this section, it will display the available devices on the system for user to configure the
boot settings and the boot priority.
Boot Option #1/#2/#3/#4/#5/#6
Use this to set the system boot order.
UEFI Application Boot Priorities
Specifies the Boot Device Priority sequence from available UEFI Application.
Setup Prompt Timeout
Configure the number of seconds to wait for the UEFI setup utility.
Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots up.
Boot Beep
Select whether the Boot Beep should be turned on or off when the system boots up. Please
note that a buzzer is needed.
Full Screen Logo
Enable to display the boot logo or disable to show normal POST message.
104