Omron VARISPEED F7 Datasheet page 17

C
Communication option cards
Type Model
3G3RV-PDRT2
SI-P1
SI-S1
SI-J
CM090
SI-T
1. Please refer to TrajeXia, MCH or MP series section for host controllers detailed information.t
D
Reference option cards
Type Model
AI-14U / 3G3IV-PAI14U
AI-14B / 3G3IV-PAI14B
DI-08 / 3G3IV-PDI08
DI-16H2 / 3G3IV-PDI16H2
E
PLC option cards
Type Model
3G3RV-P10ST8-E
3G3RV-P10ST8-DRT-E
Varispeed F7
Description Function
• Used for running or stopping the inverter, setting or referencing parameters, and monitoring
DeviceNet option card output frequency, output current, or similar items through DeviceNet communication with the
host controller.
• Used for running or stopping the inverter, setting or referencing parameters, and monitoring
PROFIBUS-DP option card output frequency, output current, or similar items through PROFIBUS-DP communication
with the host controller.
• Used for running or stopping the inverter, setting or referencing parameters, and monitoring
CANopen option card output frequency, output current, or similar items through CANopen communication with the
host controller.
• Used for HVAC control, running or stopping the inverter, setting or referencing parameters,
LONWORKS option card and monitoring output current, watt-hours, or similar items through LONWORKS communi-
cations with peripheral devices.
Ethernet option card • MODBUS TCP/IP ethernet interface unit.
• High speed motion bus.
• Used for running or stopping the inverter, setting or referencing parameters, and monitoring
MECHATROLINK - II
output frequency, output current, or similar items through MECHATROLINK-II communica-
option board
tion with the host controller.
• Host controller: TrajeXia, MCH or MP series
Description Function
• 2 channel high resolution analog input card
• Channel 1: 0 to 10 V (20 K )
• Channel 2: 4 to 20 mA (250 )
• Resolution 14 bit
Analog input card
• 3 Channel high resolution analog input card
• Signal level: -10 to +10V (20 K )
•Resolution: 13 bit + sign
• 8 bit digital speed reference input card
Digital reference card
• 16 bit digital speed reference input card
Description Function
• Full PLC features, wireless installation and seamless access to the inverter parameters and
analogue/digital inputs and outputs.
PLC option
• Embedded Compubus/S fieldbus
• Standard OMRON tools can be used for programming
• Same features as standard model with DeviceNet support.
PLC option with DeviceNet
1
s4 to 20 mA (250 )
285