Omron V680 Product Manual page 34

8-/32-Kbyte Memory ID Tag
V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
Controller or ID Sensor
Unit transmission
speed setting
Normal mode Read
Write
High-speed mode Read
(See note 2.)
Write
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when
the transmission speed is set to high-speed mode.
3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
V680 Series
34
Command Write verification
setting
---
Yes
No
---
Yes
No
RFID System
Number of bytes to TAT (ms) (See note 1.)
processed (byte)
100 172
256 388
512 746
1,000 1,430
2,000 2,820
100 231
256 494
512 929
1,000 1,759
2,000 3,449
100 192
256 408
512 766
1,000 1,450
2,000 2,840
100 117
256 255
512 485
1,000 925
2,000 1,815
100 163
256 348
512 655
1,000 1,241
2,000 2,431
100 142
256 296
512 551
1,000 1,040
2,000 2,030