Storage And Transportation Precautions; Installation And Wiring Precautions - Omron R88A-MCW151-DRT-E Operation Manual

Storage and Transportation Precautions

4

Storage and Transportation Precautions

Do not hold the product by the cables or motor shaft while transporting it. Doing so may
! C a u t i o n
result in injury or malfunction.
Do not place any load exceeding the figure indicated on the product. Doing so may result
! C a u t i o n
in injury or malfunction.
Use the motor eye-bolts only for transporting the Motor. Using them for transporting the
! C a u t i o n
machinery may result in injury or malfunction.
5

Installation and Wiring Precautions

Do not step or place a heavy object on the product. Doing so may result in injury.
! C a u t i o n
Do not cover the inlet or outlet ports and prevent any foreign objects from entering the
! C a u t i o n
product. Doing so may result in fire.
Be sure to install the product in the right direction. Not doing so may result in malfunction.
! C a u t i o n
Provide the specified clearance between the Servo Driver and the control panel or with
! C a u t i o n
other devices. Not doing so may result in fire or malfunction.
Do not apply any strong impact. Doing so may result in malfunction.
! C a u t i o n
Be sure to wire correctly and securely. Not doing so may result in motor runaway, injury,
! C a u t i o n
or malfunction.
Be sure that all mounting screws, terminal screws, and cable connector screws are tight-
! C a u t i o n
ened securely. Incorrect tightening may result in malfunction.
Use crimp terminals for wiring. Do not connect bare stranded wires directly to terminals.
! C a u t i o n
Connection of bare stranded wires may result in fire.
Always use the power supply voltages specified in the manual. An incorrect voltage may
! C a u t i o n
result in malfunction or burning.
Take appropriate measures to ensure that the specified power with the rated voltage and
! C a u t i o n
frequency is supplied. Be particularly careful in places where the power supply is unsta-
ble. An incorrect power supply may result in malfunction.
Install external breakers and take other safety measures against short-circuiting in exter-
! C a u t i o n
nal wiring. Insufficient safety measures against short-circuiting may result in burning.
Take appropriate and sufficient countermeasures when installing systems in the following
! C a u t i o n
locations. Not doing so may result in damage to the product.
• Locations subject to static electricity or other sources of noise.
• Locations subject to strong electromagnetic fields.
• Locations subject to possible exposure to radiation.
• Locations near power supply lines.
Do not reverse the polarity of the battery when connecting it. Reversing the polarity may
! C a u t i o n
damage the battery or cause it to explode.
Before touching a Unit, be sure to first touch a grounded metallic object in order to dis-
! C a u t i o n
charge any static build-up. Not doing so may result in malfunction or damage.
xiv
4