Omron NS - REV 04 Operation Manual page 38

Ns series programmable terminals

1-6 Restrictions

Applicable Project Versions

When connecting to the host by means of Host Link communications, use version 6.0 or later

for creating the screen data (project) to be transferred to the NS-V1/V2 PT.

To use a project of version 5.x or earlier, first use CX-Designer to convert the project to

version 6.0 or later before transferring it to the NS-V1/V2 PT.

Applicable Serial Ports

Either NS-V1/V2 serial port A or B can be used to connect to the host by means of Host Link

communications.

Applicable NS Models

Only NS-series PT models with a -V1/V2 suffix can be used to connect to the host by means

of Host Link communications. NS-series PT models without the -V1/V2 suffix cannot be

connected.

Table of Contents