Advertisement
(1) Press the Comm. Tab in the System Menu to display the Communications Setup Screen.
(For the NS5 PT, press the Comm. Button in the System Menu to display the screen, and
then press the ← and → Screen Switching Buttons to display the screen for page (2/3).
(2) Press the drop-down menu button and set Host Link as the communications method for
serial port A or B.
(3) Press the Detail Button to display the Host Link settings, and select Comm. Speed.
(4) Press the Write Button and press the Yes Button on the following dialog boxes to restart
the NS-V1/V2.
NS12/NS10/NS8-V1/V2 PT
(The screen is somewhat different for the NS12.)
NS5
33
Advertisement
